Sweater from knitted reasons

Sweater from knitted reasons

Pulover din motive tricotateSize: 36/38;
You will need:
380 g white yarn Blues;
circular knitting needles no. 5;
crochet No. 2.2;

Work density:
15 stitches x 20 rows = 10×10 cm;

Floral motif will knit circular from the outside inwards.
Row 1: * 1 yarn over, 2 knit stitches together, 26 stitches front, Repeat from *.
Row 2: * yarn overs will knit as front stitch, 2 knit stitches together, 25 stitches front, Repeat from *.

Repeat row 1 and 2, considering the declines from previous row.

The elastic:Schita pulover din motive tricotate
Will knit 2 rows with a Jersey point. Along the blue color lines (indicated in sweater pattern), first row it will knit as follows:* 1 yarn over, 2 knit stitches together*, it's repeat *-*.

Work description:
The sweater consists of 4 reasons, circular knitted from the outside to inside. For every reason will be mounted on needle 224 stitches. Will knit 2 rows elastic. Pay attention to the color of the line from pattern.
After will knit floral motif.

When on needle will remain 16 stitches, working yarn is cut, leaving an end longer. The yarn is passed through remaining stitches and tightens. Remained end shall be pass on back side of detail and will be fix.
Details will sew or will be fixed with the help of a crochet according to the pattern.

Comments to Sweater from knitted reasons

  • Want more details on how to work this beautiful blouse alba.In first think should be used more cotton thread. not mohair or something down.
    crochet and knitting needles are used and?
    start with making a simple mesh 224?not working headband(elasticul)?
    my email address is gbrlcostache@yahoo.com
    expect more,nice thank you!

    Anonymous 22 October, 2013 5:18 pm
  • Of course at this sweater knitting cotton thread is used, Acrylic, merino. There may be various combinations, Just not fluffy.
    Crochet a union reasons to use.
    How about knitting good reasons described in the article. Studied the pattern. Each diamond represents a floral pattern in.
    Mounted on 224 mesh andrea their close circle. They share 8 = 28 stitches for each side and start by printing. If the blue line is the elastic will be one place and one point hemstitch jersey, if two lines are black dot jersey. Then start knitting motif.
    Nothing easier. Good luck!

    Nina 23 October, 2013 7:23 am
  • Hello I have a question and I row 2 is the opposite of work?where it says that it will knit 2 stitches together against,25 stitches knit fata.Sau those reasons will only work against?expect an answer a lot of health.

    ghinea bianca 7 March, 2014 2:01 pm
  • For Bianca: If the reason is a circular tricoteaza, How to be the second dos?
    Attention and rebounding. Studied the pattern. If the reason for the line's first blue of the eyelet will be elasticului (1 yarn over, 2 knit stitches together) and the second- all stitches front.
    If the line is black, among 1 and 2 of the elastic knit mesh will face.
    Good luck!

    Nina 7 March, 2014 8:44 pm
  • Hello! For size 46-48 how many eyelets montez on andrea?
    Thank you.

    Caroline 18 February, 2015 12:46 pm
  • Depends on the thickness of the yarn with which knitted stockings. On the sculul of wool that will knit you information: x x y mesh rows = 10×10 cm.
    Will help much when the No.. meshes.
    Another option would be to begin knitting the plea from the inside out until you get to the size required..
    or will it give an example:
    Measure your bust circumference that divide 2. Let's say this is 96 cm/2 = 48 cm for front side.
    The thread you use, write the label as a 10 cm 20 mesh have ex.
    The reason it has 8 sides, each side would have 16 cm.
    If you have 2 to 1 cm meshes at 16 inches you will have 32 stitches. So the total number will be 8 (number of sides) x 32 = 256 stitches.
    And knitted stockings after description. Row 1 will be: * 1 yarn over, 2 knit stitches together, 30 mesh face *;
    Row 2:* jeteul is tricoteaza eye girl, 2 knit stitches together, 29 stitches girl * etc..
    Pay attention to the thread you use. If acrylic, Mount andrea 8-eyelets on less – Acrylic clothes expand over time, If lana – no. mesh remains stable or can be mounted on andrea 8-less.

    Nina 20 February, 2015 10:55 am
  • Wool clothes Mount on 8-andrea more.

    Nina 20 February, 2015 10:57 am
  • I read the comment:. Ms. Carlson.,by Ms. nina.And I'm interested in size 44. both port.To understand the, Ms. Nina, 256 stitches as montez,because I have 96 cm over bust.
    What do I do after I mounted the stitches?Make simple stitches, Double,or how? How do I work the first row?Has elastic, What kind of eleastic,how working police car games?I know of 1 eye on face, 1 eye inside.I see there a jeteiri.
    After rebounding it begins: 1 yarn over, 2 stitches (low),taken together ,on the front, 30 mesh front, 1 yarn over, 2 stitches(low) taken together and 30 other meshes,on the face and so on, first of all.It works on circular knitting needles,circular?
    the next row is the same,just as each other, There will be 29 meshes,on the front.And so on until we get to 16 meshes between jeteuri

    g 10 March, 2015 4:20 pm
  • More read the article one more time and adjust producing reason according to the number of meshes. Pay attention to the thickness of knitted stockings. It is possible to start with fewer or more mesh than is necessary.

    Nina 11 March, 2015 11:36 am
  • Hi Mrs. Nina I am overjoyed things dv.si exlicatiile and thank you. ASI work and sweat but I will access and ask something if I let,I acrylic thread 100 100 s a thread more NIA ptr. as e ptr. babies and I work with pins 3 ptr. Mar 34-36 and gravy to put eyelets kinda reads
    Thank you

    Sucia domnica August 4, 2015 3:53 pm
  • Dear Nina I like very much your stuff. and explanations,and thank you as we are of great help. ASI work this sweater but asi had a question a mar. 34 with acrylic thread ptr. Baba ochi.sa citre bring thanks
    and expect an answer.

    Sucia domnica August 4, 2015 5:49 pm
  • Thank you for your appreciation.
    So I can calculate the number of meshes with wire density I you knit: How many eyelets and how many rows to 10×10 cm (information can be found on sculului) and bust circumference in cm's child.
    When you have time, send me the data.

    Nina August 5, 2015 8:48 am
  • Hi ,will bother with information from 35 e 10x10cm,and at bust76cm. Thanks and we look forward

    Sucia domnica August 6, 2015 7:41 pm
  • I sent a comment hasn't gotten

    Sucia domnica August 7, 2015 3:49 pm
  • Good evening!
    You have a very thin yarn. A reason will have 368 stitches, a side 46. The stitches in the circle hook. Further it will knit as described. Pay attention to the color of the lines of print.
    If the line is black, the first two lines are dot tricoteaza Jersey,
    If it's blue line, First you will knit * 1 jeteu, 2 knit stitches together*, Secondly with all stitches face, then knitted stockings floral motif. Row 1: (1jeteu, 2 knit stitches together, 44 front mesh)x8.
    Row 2:(jeteul is tricoteaza as eye girl, 2 knit stitches together, 43 front mesh)x8- that's row with declines.
    And in this way, considering the declines.
    Good luck!

    Nina August 7, 2015 9:29 pm
  • I read the label on 25 m.iar sculului35 His bust of 76cm. Thanks

    Sucia domnica 8 August, 2015 7:18 pm
  • Thank you and excuse because now I came the answer. I wish you good health and enjoy the models and schemas .

    Sucia domnica 8 August, 2015 7:22 pm
  • Hello again will bother I started working this lovely blouse but I find too high I put 236 ochuri,and I aiesit a side 20 cm. There is great to keep going or is it not what advice I give. Expect an answer please.

    Sucia domnica 9 September, 2015 2:32 pm
  • And how measures diameter? If you bust girth of 76 cm, the diameter should be 38 cm.
    If you have a diameter of more than, adjust the reason. Mount on andrea 224, mesh or 216 etc.…

    Nina 9 September, 2015 3:06 pm
  • ATI 256 meshes mounted 236. To adjust the number of meshes subtract that splits at 8.

    Nina 9 September, 2015 3:07 pm
  • I have a question if you are yourself how to start from Darbar means to put 16 mesh and inpart 8 Please tell me how. Thank you

    Sucia domnica 17 September, 2015 6:50 pm
  • Ooo! How awesome!… I love it, I want it, I need it!!! I’ll start calculating the stitches I need and knitting this marvel with some mercerized cotton I got for a different sweater although… it’s not white… and one of the things that make this sweater so special is its striking white!
    Warm greetings, again, Nina

    Angelica 7 May, 2017 3:06 am
  • Good day, the bodice of this beautiful, could you do a tutorial of as spinning off???,-I would like a lot

    Bibiana 3 July, 2018 3:22 pm
  • I could get this sweater for a knitting font ? The is so beautiful

    Gabby Marschner 10 September, 2019 7:25 pm
  • I understood how the model works and no. of stitches depending on the thickness of the thread, what I didn't understand and I would ask you to explain to me is how you connect the bust measure by how many cm. I return to the side of the octagon. Thanks.

    Marcela 13 March, 2022 5:16 and I
  • Comments still work? How mine didn't even appear on the site?

    Marcela 13 March, 2022 3:29 pm

Leave a Comment

Your email address will not be published. Required fields are marked *