Beige jumpsuit with hood


Beige jumpsuit with hood

salopeta bej cu glugaSize: 62/68; 74/80;
Materials needed:
– 250/300 g beige thread (70% lana, 30% alpaca, 90m/50g);
– 200/250 g white wire;
– Knitting needles no. 5 is 5.5;
– 4 staples;
– 4 buttons.
Work density: Ochiuri randuri = 18 x 24 10 x 10 cm.

Work description:
The Cracul back: Mount on needle no. 5 white wire 25/29 mesh and knits 6 cm point Jersey and 1 row dos with all stitches face. Then, will knit with yarn and knitting needles nr beige. 5.5 point Jersey between edge stitches.
After 18.5/22.5 cm from woven headband will add from left side 1×1 eye and every 2nd row 1 x 1 and 1 x 2 mesh, After the mesh pass on helpful andrea.
Rear left leg with the right knitting symmetrically.

Back: Pass the needle stitches and left CRAC rights and point jersey knit with beige thread, first of all tricotand together 2 stitches after edge eye = 57/65 meshes.
After 45/47 cm from woven headband, for the neckline sleeves, they conclude from both sides 1 x 2 plates and every 2nd row 1 x 2 and 1 x 1 mesh eyes. After 60/70 cm from the remaining stitches ends woven headband.

Right leg and the right front: Mount on needle no. 5 white wire 25/29 fried and tricoteaza Jersey and point 6 cm 1 turn inside out with all stitches face. Then, will knit with yarn and knitting needles nr beige. 5.5 point Jersey between edge stitches.
After 18.5/22.5 cm from woven headband will add from right side 1×1 eye and every 2nd row 1 x 1 and 1 x 10 mesh.
From the left it will make islands like rascroiala at the back and at the same height.
After 54/63 cm from the beaded headband, for the neckline, from the right side will end 1 x 11/13 stitches in every second row 1 x 3 mesh, 2×2 stitches and 1×1 stitch.
After 60/70 cm from the remaining stitches for shoulder beaded headband ends.
The left and the left side Cracul girl: will knit symmetrical to right side.

Sleeve: Mount on needle no. 5 with white thread 38/42 and tricoteaza mesh 6 cm point Jersey and 1 row dos with all stitches face. Then, will knit with yarn and knitting needles nr beige. 5.5 point Jersey between edge stitches.
After 6 cm from woven headband will add both parts 1×1 eye and every 8th row 3/1 x 1 eye and every 6th row and 1/5 x 1 eye.
After 21/24 cm from woven headband, from both sides ends 1 x ¾ mesh and every 2nd row 1×2, 1×1, 1×2, 1×3 and 2 x 4/5 stitches.
After 27/30 cm from woven headband, the stitches remaining ends.

Right half of the hood: Mount on needle no. 5.5 wired beige 5 tricoteaza point and mesh Jersey between edge stitches.
For neckline, you will get extra from the left side every 2nd row 1 x 3/4, 1 x 4/5, 1 x 6/7, 1 x 9/10 mesh.
Then every 6th row 4/1 x 1 eye and every 8th row 1/4 x 1 eye.
After 20 5/22.5 cm from first, from the left side end 1 x 1 eye and every 2nd row 2 x 1, 4 x 3 and 1 x 4-burners.
After 27/30 cm from the first stitches remaining ends.
Left half will knit hood symmetrical with the right.

Finishing: It's cos umerii, sleeves (half sleeveschema salopeta bej-senpolia to start at the shoulder seam). The basket and the sides of the sleeve jumpsuit. The inner edges of the right and left front part will bend with 3 cm inwards and sew. White Bentitele 6 cm will bend inwards with 3 cm and sew on the dos. Bottom of the short side and left side front front dreapra will be stacked with the right top and trousers will be stitch Crace.

Rascroielii neck edge with beige thread mounted on knitting needles 57/65 meshes, leaving off the first 1.5 inches from each edge of the inner right and left front and knit 2 cm point Jersey. Mesh ends. Bentita if indoie it up with part of the pe. Up with WHEEL. The front edge of the glugii can be mounted on andrea 88/94 wired mesh beige and a beaded headband tricoteaza of Jersey and point 2.5 cm 1 turn inside out with all stitches face. Then the white wire will knit 6 cm point Jersey. Mesh ends. Knitted band bend inwards from the inside out and sew among. The hood is sewn under rascroielii neck headband.
On the right front side of the bent will sew buttons spaced, and staples shall be fixed as they (see picture).


Leave a Comment

Your email address will not be published. Required fields are marked *